Your safety begins with your vehicle. 

Implementing a regular vehicle maintenance schedule can help keep you safe when driving, whilst also preventing any costly repairs. 

We’ve compiled a few checklists that will ensure your vehicle is kept in shape and ready for deliveries. 

Servicing your vehicle 

It is very important to service your motor vehicle at the specified time or kilometre interval (whichever comes first). Leaving too much time and driving too many kilometres between services can compromise your vehicle’s safety. Long-term, this may cause significant damage and premature wear. 

Cars

Regular safety checks on your car can save you from costly damage and wear. You should consider doing a regular safety check at least once a month, to maintain a safe and working vehicle. Take a look at your car’s manual for further instructions depending on the model.

It is recommended to check:

• the engine oil, transmission fluid, windscreen washer liquid, radiator coolant, and brake and clutch fluid are at the right levels (top them up if necessary)
• the tires (including the spare) are in good condition and at the right pressure (fill them up if necessary)
• all of the gauges and warning lights work when you start the car
• the lights on the outside of the car work well
• all of the glass is free from chips, cracks and scratches
• the windscreen wipers and washers work properly
• the handbrake holds the car still on steep hills
• the horn works.

Motorbikes/Scooters

Before each ride, it is recommended to check:

• Brakes are functioning well
• Clutch and throttle are working smoothly
• Cables are lubricated
• Tire pressures are correct and look for tire wear
• Chain is lubricated and adjusted
• Lights, indicators and horn are all in working order
• Mirrors are clean and properly adjusted 
• There is sufficient fuel and oil 

Ebikes

You can perform the “3 Minute Check“  each time you ride.

1. Tires should feel very firm to touch – the correct pressure is written on the side of each tire.

2. The seat should be at the correct height and the seat post should be tightly inserted at least 5 cm into the frame.

3. You should lift the handlebars, spin the front wheel, apply the brakes and check that the:

• Wheel is properly secured in the forks
• Wheel rotates freely without rubbing on the brakes
• Gears and brakes operate quickly and smoothly